Description
Hepa Ultracel I Filter
The Ultracel I Hepa filter is designed to provide solutions for the stringent requirements of cleanrooms. The filter media is made from ultra-fine fiberglass with high dust removal efficiency from H10 (95%@0.3µm) to H14 (99.999@0.3 µm).
The filter is pleated and separated by corrugated aluminum separators, maximizing the filtration area while ensuring standard airflow and pressure drop requirements. Product classifications include standard airflow filters, high airflow filters, heat-resistant filters, and custom filters.
Applications
These filter series are very suitable for applications in cleanrooms from Class 100000 to Class 1000, such as pharmaceuticals, semiconductors, laboratories, food and beverage production, and hospitals.
- Ultracel I SC standard airflow
This model is designed with a surface air velocity of 1.5 m/s for stable airflow - Ultracel I HC high airflow
This model is designed with a surface air velocity of 2.5 m/s for high airflow. - Ultracel I HT high heat resistant
This model can withstand operating temperatures in a temperature range of 250 to 350 degrees Celsius.
■ Includes 2 types: Standard airflow & high airflow
■ Frame: MDF, Aluminum, G.I, SUS 201, 304
■ Filter grades: E10, E11, E12, H13, H14, U15
■ Uses all sizes as per customer requirements
■ Note: Standard frame thickness is 149 & 292 mm
Technical specifications:
■ Hepa type: Aluminum – Separator
■ Filter material: Fiberglass
■ Dust particle size 0.3 – 0.12 micrometers
■ Initial pressure drop: 250 – 350Pa
Hepa Ultracel II Filter
Mini-pleated filter. Automatically sprayed airtight gasket, ensuring 100% airtightness throughout the filter box lifespan.
- Hepa/Ulpa Filter with expanded filter surface
- The pleated design and separation by flexible plastic allows Ultracel II to operate at low pressure drop due to the use of a large filter media.
- The filter media is made from ultra-fine fiberglass with high dust removal efficiency from H13 to U16.
- Ultracel II is protected by 2 layers of mesh, ensuring product safety during installation.
Advantages
- Lightweight and durable, environmentally friendly
- Entirely leak-tested and certified.
- Ultra-fine pleat design, minimizing operating costs
Applications
- Air filter products suitable for high-cleanliness cleanrooms from class 1000 to class 1
- Suitable for the semiconductor electronics, pharmaceutical, laboratory, biotechnology industries… and special applications requiring high air quality control.
Manufacturer’s recommendations
The manufacturer recommends replacing the Ultracel II filter when the final pressure drop reaches 500 Pa
■ Includes 2 types: Standard airflow & high airflow
■ Knife-edge (gel seal) and gasket seal frames: MDF, Aluminum, G.I, SUS 201, 304
■ Filter grades: E10, E11, E12, H13, H14, U15
■ Uses all sizes as per customer requirements
■ Note: Standard frame thickness is 69 mm
Technical specifications
■ Hepa type: Mini – Pleat
■ Filter material: Fiberglass
■ Dust particle size 0.3 – 0.12 micrometers
■ Initial pressure drop: 110 – 125 Pa
■ The manufacturer recommends replacing the Ultracel I filter when the final pressure drop reaches 500 Pa
Hepa Ultracel V Filter
Mini-pleated filter placed in a V-bank filter box allows Ultracel V to provide high flow rates up to 4000 m3/h, saving installation space.
Filter box made from various materials, sealed with a special adhesive pouring method, ensuring filtration efficiency throughout its service life.
Product information
• Filtration grades E10, E11, E12 and H13 according to EN 1822
• Uses moisture-resistant fiberglass material, allowing Ultracel V to operate in humid environments, near the sea…
• With a filter frame made of ABS plastic and galvanized steel, providing product sturdiness, suitable for the stringent requirements of various industries.
Applications
• Ultracel V is installed in HVAC systems, especially directly behind the AHU in the food processing, pharmaceutical, and semiconductor electronics industries…
• Used in gas turbine air filtration systems in the power generation industry.
