The use of the measuring device is very helpful for people in the field of life, health, and scientific research. To ensure the accuracy for the measurement results, then we need to the calibration, testing and calibration. The name is almost the same, but the concept as well as the purpose of them is completely different. Join us as we learn how to distinguish calibration what is calibration what is and what is okay.
Calibration is what?
Calibration is an activity to identify and establish relationships between the standard measurement with means of measuring. From that assessment wrong number and the specific characteristics of digital value measurement of other quantities need to do.
Calibration not required, based on the calibration result, customers decide whether the device can use again or not.
Explain the concept of calibration:
- measurement Standard: the concept of the technical means used to express and maintain unit of measure of the quantity measured. It is used to make a standard to compare with the means of measuring or the measurement standard to another.
- Media measurement is the technical means used measurements are made.
- Measurement is a collection of operations defined measured values for the quantities to be measured.
(Content according to the Law on the Measurement of 04/2011/QH13 dated 11/11/2011)
The purpose of calibration is to do:
- perform calibration to maintain the value for the standard system and the system of the measured medium are used. The link between them with the standard of measurement will ensure the consistency and the accuracy of measurements.
- Determine the error of the measured medium to adjust the metering facilities for compliance with the calculation of measurement.
- Ensure the reliability of the means for the accurate measurement results high.
- Help find out the malfunction or predicted the failure to repair the measured medium in a timely manner.
- Matching the quality standards of the industry, of national or international standards.
Correction what is?
Calibration is the job of editing the flaws of machinery and equipment to our precision and reliability needed.
The purpose of the calibration is what?
So calibrate a measuring device is the activity check and if necessary adjust to for outputs synchronized with the input elements in the measuring range is specified. If not properly calibrated to give accurate measurement results, then a modern device to now also become useless.
Testing what is?
Accreditation is active techniques to identify, assess the fit of the measured medium in comparison with the legal requirements have reached the technical indicators corresponding specific or not. Results will be borne by the state identified is reached or not reached.
Accreditation is a mandatory nature with the means of measuring, located in the “List of mandatory equipment inspection” according to the content decision no. 13/2007/QD-BKHCN dated 6/7/2007 of the Ministry of Science and technology.
The inspection is only a unit of the state agency competent in the field of standards, metrology and quality-made in the specified range.
Measuring equipment after the inspection is satisfactory will be stamping inspection. Or will issue a certificate of inspection from the state administration of measurement or facilities authorized state accreditation and have them valuable legal in the country.
Discrimination, calibration, Inspection and adjustment of
comparison distinguish calibration and checking of the same and different at what point?
- Between calibration and checking of the same :
The 2 is that the action is comparable means of measuring with standard to assess the degree of wrong number. Along with the featured techniques, measurement of other media measurement.
- The difference between calibration and method of inspection:
Inspection mandatory application according to the requirements of legal also calibrated according to the nature voluntary. Based on the calibration results that the customer decided he should continue to use the measuring device that anymore or not.
distinguish calibration and adjustment
calibration and calibration is the act 2 regulations differ entirely about the nature. A side calibration is evaluated on the wrong number, to check the accuracy of the measuring machinery. And a the left side is calibrated adjustment to fix the device if necessary to obtain the correct information.
So you have accurate information about how to distinguish calibration, Inspection and calibration to avoid confusion in using the word, identify the right things to do to apply to work and life. Please regularly visit the website of Migco us to update the most useful information not only about the gas industry, the industry equipment gas that all these posts useful I see you.
